| Incubator Bacteriological:(Lab Model): Make “Galaxy”: Double walled, outer body of M.S. powder coated, Inner S.S. 304 lagged with glass wool. Temp. range ambient +5ºC to 60ºC. Bottom heater duly covered by S.S. perforated sheet, Temp Indicator/Controller with PT 100 Sensor, resolution 0.1ºC, Bottom AC Motor for uniform Air circulation. Accuracy ± 0.5ºC. Inner door in Acrylic. Also available in memmert type triple body top Motor for Uniform air circulation for better efficiency. Working Chamber Size 14” x 14” x 14” 18” x 18” x 18” |  |
| B.O.D Cooled Incubator: Make “Galaxy”:Double walled, Interior of Stainless Steel 304, exterior of Mild Steel finished in powder coating epoxy paint. Full-length inner acrylic door and outside metal door with magnetic gasket and lock. Two perforated removable Stainless Steel tray at fix distance. Unit consists of Digital Display Temperature Indicating Electronic Controller with PT-100 as a sensor, pilot lamps for all switches and controls. Automatic chamber light. Forced Air Circulation for uniform temp. Hermetically sealed compressor castor wheel for easy movability. Temperature range: 5ºC to 50ºC accuracy ± 0.5ºC. Unit works on 230Volts AC.50 Hz main supply. |  | ||||||||||
| Working chamber Size W x D x H in CM | Capacity | Cu. Ft. |
| 45 x 45 x 45 | 90 Liters | 3 |
| 45 x 45 x 60 | 120 Liters | 4 |
| 50 x50 x 50 | 175 Liters | 6 |
| Orbital Shaker Incubator: Make “Galaxy”:Orbital Shaker Incubator with Digital Indicator/ Controller Air circulation motor Temp. above ambient ±5ºC to 65ºC. Inner S.S. 304 outer M.S. powder coated Inside illumination provided with RPM Indicator and variable speed Regulator also PMDC motor Provided. Inside Capacity 250ml X 12 flask lotus clamp platform. Or as per buyers requirement. Glass wool insulator. Runs on 230 Volt AC supply. |  |
| Bulk Density Apparatus Analog: i) ANALOGUE BULK DENSITY APPARATUS. Model - BULKDEN To determine the density of the powder. A motor moves a shaft carrying clamps at each end to hold graduated cylinders in an up and down direction at a frequency rate between 28/32 cycles per minute through a distance of 5-6cms. The flanged bottom of the glass cylinders struck on a cushion fitted on the platform. A timer is provided to set the duration (Supplied without Measuring Cylinder). Option: Digital Timer |  |
| ii) DIGITAL BULK DENSITY APPARATUS Model: BULKDEN-D - This is a microprocessor based instrument designed to study the packing down of powder beds of different pharmaceutical & chemical powder and gives accurate & repeatability of the result. - Bulk Density is an essential test required in the process of Tablet manufacturing, capsule filling and cosmetics manufacturing as important part of quality control program. - 4 digit microprocessor based pre- set counter provided to set exact no Of strokes. - This feature eliminates the tedious calculation of timer mode . A common holder for both the cylinder drops down smoothly from the specified height. Easy to lock cushioned holders are provided to hold the cylinder. - In power failure, the non-volatile memory of the microprocessor remember the last mode of operation, and complete the test after the power supply is resumed. Cylinder capacity : 50ml. x 2 nos. No. of drops : Adjustable between 1to 9999 drops Display : Digital 12 mm Red LED Drop Height : 25mm approx Weight : 11kg. approx Optional: : 50 ml measuring cylinder – 2 nos Note : +Drop Height 50 mm on request +Also supply holder for capacity 100 ml. Or 250ml. Measuring cylinder.s |  |
| Microscope: a) Medical Microscope Objectives : 10x, 40x, (S/L) & 100x (S/L) OIL lmm Eye-Pieces : WF 10 x & H 15 x Supplied in STYROFOAM full molded box |  |
| b) Binocular Microscope Objectives Achromatic(Din) : 4x, 10x, 40x,(SL) & 100x (S/L) OIL lmm Eye-Pieces : WF 10x Paired Illumination : 6V-20W Halogen Lamp (in-Built) Supplied in STYROFOAM full molded box |  |