| Electrodes:
|  |
| Ultrasonic Bath (Sonicator):
Ultrasonic Cleaner “Make Wensar” (ISO 9001:2000 Certified Co.) Features: - Continuous self tuning circuitry for any change in workload, liquid level and bath temp. - Uniform cavitations throughout the tank. - Separate oscillator eliminates damage to generator in Case of failure of transducers. - Using 40 + 3 KHZ frequency for effective cleaning with low noise. - Designed for complete cleaning of small and large components without dismantling. - Inner tank and outer body made of stainless steel. - Heating ambient to 800C digitally controlled (Dual Display) - Digital timer 5 to 60 minutes. - Mains supply: 220 volt, AC 50 Hz, Single Phase Model No. Capacity Wattage Tank Dimension WUC-2L 2 liters 50 W 150x137x150 WUC-4L 4 liters 100 W 235x135x150 WUC-6L 6 liters 150 W 300x153x150 WUC-9L 9 liters 200 W 300x240x150 |  |
| Antibiotic Zone Reader a) Antibiotic Zone Reader - The Zone Reader measures the diameter of the Inhabited Zone to 0.1mm. within range of 0 to 35mm. - Light from source in the base passes up through the transparent and semitransparent portion of the Agarthen to a reflecting mirror supported by an arm above the unit. - The mirror reflects the light to a glass prism mounted at the front of the unit and the magnified image of the zone of inhabitants is clearly visible on the prism. |  |
| b) Digital Antibiotic Zone Reader - The Zone Reader measures the diameter of the Inhabited Zone to 0.1mm. within range of 0 to 80.0mm |  |
| Pour Point Apparatus: CLOUD & POUR POINT TEST BATH - Four Temperature test at a time - Temperature Range : Ambient to 0oC,-18oC, -33oC & -51ºC - Inner S.S. outer M.S. powder coated, hermetically sealed Refrigeration system. Cascade refrigeration provided for bellow -31ºC & -51ºC - Copper cooling coils immersion type in the bath. Individual compartment for separate temperature. Each bath has got 4 tubes holder arrangement. - Digital microprocessor temp. indicator cum controller. Resolution 0.1ºC. temperature accuracy ±2 ºC. - With Pt -100 RTD sensor individually for each bath - Runs on 230 Volt ±10%50 Hz AC single phase supply |  |
| Measuring Instruments: * Vernier Caliper Features: • The jaws have measuring faces for accurate ID measurement. • With fine adjustment carriage to feed the slider finely. • Inside and outside measurements can be directly read from the upper and lower slider graduations respectively. |  |
| Measuring Instruments: * Dial Vernier Caliper Features: • New designed dial movement for ultra smooth sliding and high shock protection. • Titanium coating is applied to the sliding surface to strengthen the durability (except for 0 – 300mm and 0 – 12” model). No wearing by 100, 00 – time sliding test. • Can measure OD, ID, depth, and steps. • Special models available with carbide tipped OD and ID jaws. |  |
| Measuring Instruments: * Digital Vernier Caliper Features: • Large and clean LCD readout. • The ZERO / ABS key allows the display to be Zero – Set at any slider position along the scale for incremental comparison measurements. The switch will also allow return to absolute (ABS) coordinate and display of the true position from the origin point (usually jaws – closed point). • Data Hold Unit (959143) is optional. • Carbide – tipped jaw type calipers are also available. |  |
| Measuring Instruments: * Dial Thickness Gages Features: The Dial Thickness Gages offer a quick and efficient means of inspection with their convenient grip handle, thumb trigger and spring – loaded spindle. The various models cover a wide range of applications. |  |
| Measuring Instruments: * Digital Thickness Gages Features: The Thickness Gages offers a quick and efficient means of inspection with their convenient grip handle, thumb trigger and spring – loaded spindle. The various models cover a wide of applications. • Wide range of applications with various types of measuring faces (on the spindle and anvil) • The digital models incorporate Mitutoyo’s popular IDC and IDS Series Digimatic Indicators to provide error – free LCD readings as well as data output for SPC analysis. • 547 – 400S is ideally suited for measuring thickness of paper, film, wire, sheet metal and similar material. |  |
| Measuring Instruments: * Screw Gages (Micrometer) Features: • Speeder is always available for quick rotation of spindle. • New smoother action Ratchet mechanism. • More accurate in one – handed operation: test result show inexperienced users measure significantly more accurately with the new micrometer. |  |
• Circulating Bath
• COD Digester
• Flask Shaker
• Hot air Sterilizer
• Infrared Thermometer
• Kinematic Bath
• Kinematic Viscosity Bath
• Lab Incubator
• Laminar Air Flow
• Measuring Instruments
• Redwood Viscometer
• Rota Mantle
• Soxhlet Extraction Heater Mantle
• Steam Sterilizers
• Vacuum Dessicator
• Vacuum Pump
• Vernier Caliper
• Wrist Action Shaker
• Balance Single Pan
• Bunsan Burner
• Flame Photometer
• Gravity Meter
• Instrument Sterilizer
• Kjeldahl Digestion & Distillation Unit
• Penetrometer Apparatus
• Tray Dryer
Back